Detailed explanation of the common problems in the use of industrial water coolers

Common problems in the application of industrial water coolers: in actual operation, the industrial water cooler should be turned on and off repeatedly as far as possible. when the temperature of the industrial water cooler exceeds the set temperature, the refrigeration contraction machine will stop running automatically, which belongs to all normal conditions. the temperature switch should be prevented from being set below 5 ℃ to prevent the air conditioner evaporator from freezing (the cryogenic refrigerator is not in it).

In order to ensure the actual cooling effect and maintain the best situation, please clean the cooler, air conditioner evaporator and filter on time. The frozen centrifugal water pump cannot operate without water in the water storage tank (7.5HP above type, the water storage tank is equipped with water level line protection. When the water level line is too low or there is no water in the water storage tank, the centrifugal water pump will stop running by itself.

And display the information water line fault problem code and signal). The transport medium of the water cooler is generally water or glycol solution. The water cooler generates air conditioning cold/hot water through the outdoor host, which is transported by the pipeline system to each end device in the room, where the cold/hot water exchanges heat with the indoor air to generate cold/hot air, and then eliminates the room air conditioning load.

A water cooler is an air conditioning system that generates cold/heat and dissipates the load of a room. The end equipment of the water cooler is generally a fan coil. The water cooler is similar to the household cabinet machine. The difference is that outside the room, the evaporator in the water tank cools the water or glycol solution, and then passes through the water pipe to each room. The cold water is then exchanged with the hot air in the room through the fan plate in the room.